| Series |
A |
B-MNPT |
C-FNPT |
HEX |
Cv Factor |
Flow Rating |
| 143:FFDD |
4.13 |
1 - 11 1/2 |
1/2 - 14 |
1.63 |
6.7 |
Click Here
|
| 143:GGDD |
4.13 |
1 1/4 - 11 1/2 |
1/2 - 14 |
1.88 |
6.7 |
Click Here
|
| 143:GGEE |
4.81 |
1 1/4 - 11 1/2 |
3/4 - 14 |
1.88 |
10 |
Click Here
|
| 143:HHEE |
4.81 |
1 1/2 - 11 1/2 |
3/4 - 14 |
2.13 |
10 |
Click Here
|
| 143:HHFF |
5.13 |
1 1/2 - 11 1/2 |
1 - 11 1/2 |
2.13 |
16 |
Click Here
|
| 143:IIFF |
5.25 |
2 - 11 1/2 |
1 - 11 1/2 |
2.75 |
16 |
Click Here
|
| 143:IIGG |
5.63 |
2 - 11 1/2 |
1 1/4 - 11 1/2 |
2.75 |
24 |
Click Here
|
| 143:JJFF |
6.00 |
2 1/2 - 8 |
1 - 11 1/2 |
3.13 |
16 |
Click Here
|
| 143:JJGG |
6.31 |
2 1/2 - 8 |
1 1/4 - 11 1/2 |
3.13 |
24 |
Click Here
|
| 143:JJHH |
6.31 |
2 1/2 - 8 |
1 1/2 - 11 1/2 |
3.13 |
36 |
Click Here
|
| 143:KKFF |
6.50 |
3 - 8 |
1 - 11 1/2 |
4.00 |
16 |
Click Here
|
| 143:KKGG |
3 - 8 |
4.00 |
6.81 |
1 1/4 - 11 1/2 |
24 |
Click Here
|
| 143:KKHH |
3 - 8 |
4.00 |
6.56 |
1 1/2 - 11 1/2 |
36 |
Click Here
|
| 143:KKII |
3 - 8 |
4.00 |
6.56 |
2 - 11 1/2 |
60 |
Click Here
|
All Size Values are in Inches.
| |
Carbon Steel |
316 Stainless |
| Body |
Low-temp Carbon |
316-SS |
| Guide |
Low-temp Carbon |
316-SS |
| Spring |
--- 316-SS or 302-SS --- |
| Poppet(incl. nut and cotter pin) |
--- 316--SS --- |
*Alternative materials available at additional cost
MGM Model 143 Back Pressure Check Valves are designed to allow flow in one direction only. The check mechanism is held in the closed position by a spring, which stops flow in the reverse direction. When pressure from flow in the permitted direction overcomes the force of the spring, the check mechanism opens. When flow stops or reverses, the check closes. The metal-to-metal seating allows slight leakage after closure. The valves are recommended for use in inflowing lines.
Model 143 Back Pressure Check Valves are designed for installation in lines that flow into pressure tanks where threaded connections are required. These valves should be used in inflowing lines when outward flow is never required. Model 143 Back Pressure Check Valves are machined from solid bar stock with one weld in the body.
Model 143 Back Pressure Check Valves can be mounted in any orientation. Each valve will have the proper flow direction indicated by an arrow stenciled into the body. As with all MGM Back Pressure Check Valves, do not reduce outlet pipe size. Back Pressure Check Valves should be installed as close as possible to the container, with the poppet stem pointed inwardly toward the container.
